When you have problems, you'll always tend to rectify it and particularly when it comes to the problems regarding the signal strength. Having a low signal strength?. No one would like to ignore the poor wifi signal strength because it's the daily life aspect now. In this article, i am going to explain the things that lower the performance of your wifi signal and some tips to overcome those problems. Wifi router in general, provides the radio wave signal that transmits on a 2.4 or 5 Giga Hertz (GHZ) frequency. It doesn't matter how strong your network provider's network is, there are many factors that lower the performance of the router which results in the poor signal strength.
There are many factors that affect the signal strength and the performance of wifi. These factors are dependent on various areas and the technology that is used in the devices.One should always keep it in mind that fundamental physics has a greater impact in this part. When it comes to the physical aspect, it cannot be avoided and measure has to be taken to minimize the negative effect on network performance. One must have a proper network planning to avoid these major problems.People can identify some factors
themselves quite easily.
Though there are many factors that affect the signal strength, i'm going to explain only the obvious ones which is of greater concern and they are given below.
When two peoples are trying to contact each other, the network range and the distance between their devices decide the signal strength. The more they are closer to each other, more it is easy to communicate. When the two networked devices farther from one another trying to communicate, the signal strength will be low because at that point the signal has to cross a wider area to connect their
devices. Physically,signal strength is calculated by the cubic inverse of distance between the networked devices. When the distance between the router and the connected device is doubled, the signal becomes eight times weaker when compared to the area where the distance between the devices is closer.
Since Wireless Networking is becoming more and more common,more wireless transmissions are being sent through the air. So it will not be a surprise that the signal will interfere with each other and will cause negative effect on the performance of the network. Frequency bands such as the 2.4GHz band can get severely affected by the overcrowding of wireless signals to a point where a device
will not operate at an acceptable level. The other radiations such as microwaves and IR rays will interfere too. To avoid this, unlicensed 5GHz frequency band is used which is becoming popular. When operating in areas of high wireless network densities, it is better that you work with businesses, operators etc. around you to avoid future interference problems.
Wifi signals can penetrate the walls and other solid objects, but it will lose it's density when it does. For example, the router is installed in the hall and you're in the nearby closed room. Now, the signal has to obstruct the door or the wall to reach your devices. Hence the strength will be comparitively low. The more the signal has to obstruct, lesser will be the signal strength.
Considering the above factors, one can get a clear idea about how to execute the networking plans and to improve the signal strength. Though there might be some software
that can help in improvising the network standards, it can't help you better when you have those obvious factors affecting your signal strength. Keeping in mind of those
obvious factors, i would like to tell you some tips that can help you.
Thanks for reading. Hope this article helped you.
There are many factors that affect the signal strength and the performance of wifi. These factors are dependent on various areas and the technology that is used in the devices.One should always keep it in mind that fundamental physics has a greater impact in this part. When it comes to the physical aspect, it cannot be avoided and measure has to be taken to minimize the negative effect on network performance. One must have a proper network planning to avoid these major problems.People can identify some factors
themselves quite easily.
Obvious Factors affecting wireless networking performance:
Though there are many factors that affect the signal strength, i'm going to explain only the obvious ones which is of greater concern and they are given below.
Network range & distance between the devices:
When two peoples are trying to contact each other, the network range and the distance between their devices decide the signal strength. The more they are closer to each other, more it is easy to communicate. When the two networked devices farther from one another trying to communicate, the signal strength will be low because at that point the signal has to cross a wider area to connect their
devices. Physically,signal strength is calculated by the cubic inverse of distance between the networked devices. When the distance between the router and the connected device is doubled, the signal becomes eight times weaker when compared to the area where the distance between the devices is closer.
Wireless network interference:
Since Wireless Networking is becoming more and more common,more wireless transmissions are being sent through the air. So it will not be a surprise that the signal will interfere with each other and will cause negative effect on the performance of the network. Frequency bands such as the 2.4GHz band can get severely affected by the overcrowding of wireless signals to a point where a device
will not operate at an acceptable level. The other radiations such as microwaves and IR rays will interfere too. To avoid this, unlicensed 5GHz frequency band is used which is becoming popular. When operating in areas of high wireless network densities, it is better that you work with businesses, operators etc. around you to avoid future interference problems.
Physical obstructions:
Wifi signals can penetrate the walls and other solid objects, but it will lose it's density when it does. For example, the router is installed in the hall and you're in the nearby closed room. Now, the signal has to obstruct the door or the wall to reach your devices. Hence the strength will be comparitively low. The more the signal has to obstruct, lesser will be the signal strength.
Considering the above factors, one can get a clear idea about how to execute the networking plans and to improve the signal strength. Though there might be some software
that can help in improvising the network standards, it can't help you better when you have those obvious factors affecting your signal strength. Keeping in mind of those
obvious factors, i would like to tell you some tips that can help you.
Tips:
- Have a better networking plan.
- Avoid the obstructions.
- Fix the router in a location where the signal can have the ability to transmit to wider areas.
- Avoid the signal interference.
- Maintain the distance between the router and your device.
Thanks for reading. Hope this article helped you.
Post a Comment